dooroos operating system
  dorooo-framwork
  solution provider

ibosn systems

create New Value with ibosn systems

dooroos OS  
dooroo.framework  
CPU modules  
BOARD modules  
HMI  


H/W products

Download > CPU modules > DRSMDA5D3X
DRSMDA5D3X


  DRSMDA5D3X

Documents.
DRSMDA5D3X_CPU module document
DRSMDA5D3X_CPU module H/W Design file

Tool for writing the dooroos image.
sam-ba version 2.15 for dooroos image writing.
sam-ba version 2.15 upgrade library

dooroos binary image
serial-flash dooroos image for the 10.4inch LCD.
serial-flash dooroos image for the 7inch LCD.

port
port
The all the files and directories should be copied to the dooroos install directory. this file has the porting ports without the driver files. (ex. c:\)


drivers and dlls
e
default drivers and dlls.
The all the files and directories should be copied to the nand-flash filesystem. if you connect with PC by usb cable, you can access to the nand-flash filesystem.
buz driver source.
This buzzer driver generate the pwm. the internal timer controller is used.
pwm driver source.
This pwm driver generate the pwm pulse. the internal pwm controller is used.
adc driver source.
The internal adc controller is used.
adc with touch driver source.
The internal spi controller is used.
MCP3302/3304 spi-adc driver source.
The internal spi controller is used.
lan driver source.
The internal lan controller is used.
giga lan driver source.
The internal giga lan controller is used.
RTC driver source.
The internal twi(I2C) controller is used.
LED driver source.
The internal gpio controller is used.
keyboard driver source.
The internal gpio controller is used.
gpio driver source.
The internal gpio controller is used.
touch driver source.
The internal touch controller is used.
display driver source.
The internal display controller is used.
camera driver source.
The internal camera controller is used.
sound(wave) driver source of alc5621.
The i2s controller is used.
sound(wave) driver source of wm8960.
The i2s controller is used.

etc
j-boot for 7-inch LCD connected to PA[0~23].
This j-boot is for the 7-inch LCD : RGB signal is connected to PA[0~23].
Upgrade by USB memory source code.
This program and source code are for the upgrade of the CPU module by USB memory. The manager can upgrade the system anywere, anytime.
Upgrade by USB memory binray image.
The contents of this file shoud be copied to usb memory. Plug-in the usb memory to the Target board, and press the reset, the program in the usb memory is executed.

  DRSMDG35

DRSMDG35
document pdf file